BrMaSa wrote Option would be if there is another possibility of the network while still having EasyMesh capability. @BrMaSa Hi, You can setup the AX73 as an access point while in router mode by doing...

@Oldie49 What are the settings of you phone hotspot? In case you have set it to "WPA3 Personal" only, then make sure your TL-WA850RE doesn't have a very old firmware installed which doesn't support...

@dazza72 Hi, If you have the RE200 connected to the main router via Ethernet cable, then make sure you have switched it to "Access Point Mode".

@filipear123 You are right. If there are so many other Wi-Fi networks nearby, then your own Wi-Fi will always be affected. And when there are so many neighboring Wi-Fi networks, then the chances you...

@paoz Hi, The Alcatel T56-CE is not an IP-Phone, hence it cannot be used with the Archer C6. (at least not directly)

@mFat Hi, Here is a link to a lengthy thread about the in-kernel driver rtw88 for the chip used in the Archer T4U V3 which also talks about the driver not switching to USB 3.0 mode....