woozleLV5Online
Following: 0Followers: 16
Forums/ Powerline Adapters
a week ago
Re:Devices keep disconnecting
@AndyRozman The versions of the devices don't matter. Any Powerline devices that follow the "HomePlug AV2" standard should work together without issues, even if they were made by different...
0HELPFULS
Forums/ Adapters
a week ago
Re:Archer TX20E Wifi working, bluetooth not recognized
@Morholt Hi, Please check that the USB cable that came with the TX20E is wired properly. The little connector that plugs into the TX20E should be wired [ red | white | green | black ] and the F_USB...
1HELPFULS
Forums/ Powerline Adapters
a week ago
Re:Devices keep disconnecting
@AndyRozman Hi, If you swap both TL-PA8033P devices around (i.e. bring the one from the living room to your room and the one from your room to the living room) does the on/off problem follow the...
0HELPFULS
Forums/ Range Extenders
a week ago
Re:ethernet cat 6
@dazza72 The answer to your question is yes. TP-Link decided to equip their low-cost range extenders (including the RE200) with 100 Mbps Ethernet ports....
0HELPFULS
Forums/ Powerline Adapters
a week ago
Re:Extender compatibility
@Robert_DH a) -> Please use the correct user manual for each different version of the product. For the TL-WPA4220 V5 use...
0HELPFULS
Forums/ Wi-Fi Routers
a week ago
Re:EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
BrMaSa wrote Option would be if there is another possibility of the network while still having EasyMesh capability. @BrMaSa Hi, You can setup the AX73 as an access point while in router mode by doing...
0HELPFULS
1567...