I have now made this work. I have overriden the auto DNS server provided by the ISP with the OpenDNS servers so when clients connect to the default VLAN, this is the DNS server they use. I have...

@btx Problem is every time the power fails I end up having to reload the configuration into the existing router/DHCP server. I don't need internal DNS, just the ability for the DHCP server to point...

@KimcheeGUN I don't need VLANs at all, it's just this seems to be the only place to set different DNS settings for different IP ranges. On my existing router with DNSmasq, I use a single subnet and...

I need to replace my router because it is unreliable after power failure. I have an Omada Controller OC200 for my wireless network so I am looking at ER605 as the WAN interface. I currently use 2 DNS...

@JSchnee21 OK so I thought I'd give it wone more chance. I factory reset the Outdoor and checked my indoor channel setting. The outdorr unit is defaulted to Auto and the three indoor units are set to...

@JSchnee21 Thanks for all the help and suggestions. The garage is masonary (single skin brick) so that might be an issue, although it is only 3m from the house and the nearest AP is about another 5m...