Hi, Just bought CPE210 and configured through QUICK SETUP as Access Point: and LAN as: Then i disconnected from the PC and connected the CPE210 to the modem. On my phone, i find the network and connec

I have a four EA225 AP's setup on a management VLAN 192.168.200.0/24 (as well as three JetStream switches, an ER605 router and OC200 controller). The OC200 is on a static IP (192.168.10.10) and the ot

Hi, Below you will find my network topology for reference. I have "OC 200" connected to "SW 1 - Main" but it is reported by stats page in Omada as it is connected to "Switch 2 - Office". What could be

I'm having the worst time setting up port forwarding for this router. WAN is a static IP, primary DNS/Gateway are 192.168.1.85, I am assigning the ER7206 to 192.168.1.1 LAN is set to 192.168.7.1, DHCP

I can access via console, and gui once I change my ip on my computer to 192.168.0.2. I have no activity lights for LAN. But do have orange activity light for port 1(my pc) and green lights for port 2,

Hi all, I have a main router with internet connection, i've added another router with the same model as with Access Point mode, i need to disable the second router (access point mode) from getting int