Hello, When configuring the router via the controller, it is impossible to disable the SFP+ WAN. As a result, I keep getting the error ‘SFP+ WAN/LAN2: DHCP client setting IP failed’. Is there any othe

Looking at the datasheet, the ER7206 v2 is listed as a nat throughput of a full 1gbit wan connection. Is that PER WAN connection, so if you have 2x 1gbit WAN links, and with policy routing, it can ach

When setting rate limits for an SSID in controller, on 5ghz the limit per client seems to be hard limited to around 220mbit down despite the rate limit profile being set to 800mbit or any value higher

I have finally discovered what is causing some issues on my network with random connectivity loss on some vlans and it is to do with policy routing and bandwidth control. My setup: Virgin Business UK,

Hi I have an ER8411, OC200, Omada Switch and EAP650 based network running in full controller mode I know i could achieve what i want by inserting another router, putting devices on a VLAN from that an

I have a 2.5 GB fiber internet connection using a ZTE TIM Hub+ (Telecom Italia). Since the LAN ports on this router are only 1G (and the optical port on the ER707 is only 1G as well, so there is no se