Update as of May 22nd 2023: The following official firmware has fixed the DHCP issue mentioned in this thread. ER605 V1_1.3.0 Official Firmware (Released on May 17th, 2023) Note: the firmware is appli

I recently updated the OC200 hardware controller to version 5.6.4 and the ER7206 router to firmware version 1.2.3. Since the update, the router is not honoring IP reservations and is not issuing valid

@Fae, on 02/17/2022 you mentioned TP-Link was actively working to implement mDNS repeater across VLANs which was expected to be available mid-2022. is there any further update on this?

VLAN1 is the system vlan. VLAN4 is an IoT vlan. VLAN99 is a guest vlan. I want: -all three to access the internet -vlan99 only able to access the internet. No other vlans can access it or vice-versa.

My network has six VLANs. Currently, I do have individual interfaces setup for each VLAN. Each interface is assigned a static IP within the IP range of the respective VLAN. Do I need to setup an IPv4

Hello, I'm a new owner of a TL-SG3210XHP-M2 for about a month now, all looked good until today the switch had to be fully powered off and back on, upon powering back up, my sfp+ ports came back on but