I am brand new to VLANs and could use a little help with my SG2008P switch. VLAN 1 (unchangeable main VLAN for the switch) is hardcoded a static IP of 192.168.1.238 mask 255.255.255.0. Under L2 featur

Using my SG2008P as a DHCP server. I have many manual bindings setup. Can't find a way to specify a lease time for a manual binding - it's hard-coded as "infinite". Lease time is configurable for free

My SG2008P DHCP server sometimes hands out the wrong IP address. All of the IPs on my network are assigned reserved addresses by MAC address. Sometimes, the DHCP server ignores this and assigns an IP

I have configured my TL-R600VPN to send syslog messages to my syslog server. Logging messages show up fine in the Log console within the TP-Link GUI. But they never get sent to the syslog server. Othe

All the tp-link devices I have now have a timeout limit for the web interface. This can be adjusted but not eliminated. Is there any way to avoid the timeout? I would like to come back to a device's w