Hi, i use EAP610(EU) v3.0 with OC200 v1, latest firmware on both, OC200 has firmware 1.32.6 Build 20241101 Rel.41525 and EAP610s 1.5.0 Build 20240830 Rel. 63168. I setup a WLAN with both 2.4Ghz and 5G

Hi, I bought oc200 and two eap610 to handle fast roaming. Switch and router are not omada compatible. I will create 3 sssid for each eap for 3 vlans. What i woud know is how to configure vlanID of swi

Hi, I have a question: if i use a static private IP on wan port interface, and its subnet is different from LAN's subnets, will the router use NAT trough that port or not? How i could check it? Sorry

Hi, i'll connect to ER605 a 5G modem trough WAN port, and it will operate in IP passtorugh. No other internet connections will be used as failover or load balance. Because my mobile ISP drop connectio

Hi, i'll buy 3 EAPs to use with omada. I'll also buy an ER605. I need to create more ssid for different vlans in each EAP, maybe HOME, GUEST and IOT. My question is, can i connect EAPs to a simple unm

HI, reading this article https://www.tp-link.com/en/support/faq/3091/, it says to use "Switch ACL" to block routing through vlans. My stupid question is: why would I explicitly block switching between