I made a simple port forwarding rule where I expect the WAN ports from 8080 to 8082 to be forwarded to the same port numbers on a LAN IP address: Advanced -> NAT Forwarding -> Virtual Servers External

Hello. Could someone confirm if OneMesh is functioning with NAT disabled (unchecked option "Enable NAT" in Network>Internet section)? Thanks!

Just wondering on the correct sequence for firmware upgrade here. The "Upgrade Firmware" option in the web interface shows no upgrades available, but appears to be at least three upgrades on the TP Li

AX50 router never get dynamic IP directly from modem = No Internet. To ensure my setting is correct, I did below and it works AX50 connect to Asus AC68U, Asus AC68U connect to Modem, in this configura

When i go to Advance/Network/LAN the standard ip address is 192.168.0.1 when i set the ip address to 192.168.1.2 and hit apply the router reboots and comes back with the standard ip address 192.168.0.

Hi, (apologies if this is a bit long winded, but want to provide as much info on setup as i can in case it helps!) Setup: I've recently setup a home network as follows Virgin Media SuperHub 3.0 set to