Smart Home Community > Tapo Smart Camera > NC450 Sd card issues
< Tapo Smart Camera

NC450 Sd card issues

12
NC450 Sd card issues
NC450 Sd card issues
2017-10-17 09:05:45
Model :

Hardware Version :

Firmware Version :

ISP :

I have 2 nc450 cameras and they both have this same issue with sd cards. The sd cards test fine on a computer. The first camera developed this issue about a week ago and now the second camera started today. Both cameras read that there is an sd card even if there isnt. Formatting fails and so does the hard reset. Ive attached screenshots of the problems.
File:
Screenshot_2017-10-16-18-25-36.jpgDownload
Screenshot_2017-10-16-18-24-51.jpgDownload
Screenshot_2017-10-16-18-24-36.jpgDownload
0
0
#1
Options
11 Replies
Re:NC450 Sd card issues
2017-10-17 09:48:17
What's the format of your SIM card? This camera only support Fat 32 . The error message on the app says Formatting required.
And what's the firmware version ,hardware version of your camera? It is suggested to update the latest firmware first.
0
0
#2
Options
Re:NC450 Sd card issues
2017-10-18 00:13:31
Firmware is the latest and sd cards are formatted to fat32. Ive had some minor sd card issues with these cameras before like having to format them cause suddenly the camera doesnt recognize them but now its completely useless. The pic saying format required is from the camera that doesnt even have an sd card in it.
0
0
#3
Options
Re:NC450 Sd card issues
2017-10-18 00:14:53
Firmware is the latest and sd cards are formatted to fat32. Ive had some minor sd card issues with these cameras before like having to format them cause suddenly the camera doesnt recognize them but now its completely useless. The pic saying format required is from the camera that doesnt even have an sd card in it. Version is v2 i believe.
0
0
#4
Options
Re:NC450 Sd card issues
2017-10-18 15:57:27
As far as I know , the latest firmware of the camera Support 128GB SD card and formatting function.
I think you can contact the tp-link support for further assistance ...
0
0
#5
Options
thanks
2017-10-19 10:12:55
Many thanks for your input.
0
0
#6
Options
Re:NC450 Sd card issues
2017-10-31 01:05:14
I also have same problems with SD card. Especially when its nearing full capacity. .You cant format them with app. cant seem to playback history. When I insert SD card in computer; its been recording and I can access data.I can restart camera but still have the issue. I copy data then reformat. It is a nuisance as I have cameras mounted in corner on furniture. I have 2 units with same issue.
0
0
#7
Options
Re:NC450 Sd card issues
2017-10-31 10:20:27
The new version app adds the format function. Can't you see it or can't you press it?
If the SD card has some other files in it, it can't clean the data automatically even when it is full.
So it is suggested to format the sd card to FAT32 before you insert it into the camera.
Besides, the whole storage of the SD card should be over 500MB.
0
0
#8
Options
Re:NC450 Sd card issues
2017-11-10 03:17:35
Card formatted on pc a couple of times.






Also formatted on Camera





.



Card formatted on pc a couple of times.
Also formatted on Camera
here is what happens when it gets full.
I formatted again with camera and its back working.
Problem loop recording
0
0
#9
Options
Re:NC450 Sd card issues
2017-11-10 08:49:55
Suggest you to contact TP-Link support for more analyze.
0
0
#10
Options
possible
2018-06-05 18:38:39
it is possible to record directly
0
0
#11
Options
12
Related Articles
NC450 can't continue recording when the sd card is full
870 0
16 Gb micro Sd card is not detected by NC 450 cloud camera.
611 0
nc450 sd card formatting problem
3927 1
NC450 - SD Card stopped working
837 0
NC450 Doesn't Recognize SD Card
862 0
NC450 - SD card does not over write old data.
267 0
About Us
Press
Copyright © 2021 TP-Link Corporation Limited. All rights reserved.