NC450 goes offline on WLAN
Camera Name: NC450 2.0
Model: NC450 2.0
Firmware: 1.5.0 Build 181022 Rel. 3A033D
Hello to all!
Like many others in this Forum, we have strange connectivity issues with the NC450 V2.
My setup:
We need the camera connected to WLAN (Wifi), to connect via Ethernet cable is not an option.
After initial setup the camera via tpCamera App (Iphone), with cable pluged in, i changed from DHCP to Static IP. Pulled the cable and WLAN is connected at Rate 89%.
No Cloud Settings taken, we don't need it, the cam should only work in the local LAN/WLAN.
Login via Browser Firefox (64.0.2) and Live View is ok.
Installed TP-Link CameraControl in Windows 10. Login - all works fine.
After about 30 - 40 mins the TP-Link Camera Control shows "Connection Error".
tpCamera Version 3.1.4 App (Iphone) shows the NC450 "Offline".
The LED on the NC450 is constant green.
After powercycle, I upgraded the Firmware from 1.3.4 to 1.5.0.
Then i reset to "factory default settings" and setup the camera new.
All worked!
After about 30 - 40 mins. - Connection Error on TP-Link Camera Control. tpCamera on IPhone shows "offline" again.
Not able to Login via Firefox etc. The Camera Website is not reachable. Not able to ping the IP Adress.
The LED on the NC405 is constant green.
After power off the camera and turn on again, it works again... for a while.
Is there any solution for this ?
Otherwise we would send this thing back and try another manufacturer.
Regards,
Chris
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
May I know what is the current hardware and firmware version?
And why do you want to degrade to 1.3.4?
Is there any problem caused by the latest firmware of the NC450?
Good day.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I can not downgrade via web browser, the procedure only works for the current firmware 1.5.2. Please send the procedure to my email.
I have two NC450 cameras with the same problem.
Thanks
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I have a similar problem.
FW 1.5.2.
I can setup my NC450 and use on my LAN, but cannot access outside my LAN network.
I tried to downgrade without success...error upgrade fail.
Please assist....
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@DePainto Can I to have the link?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 15632
Replies: 59
Voters 0
No one has voted for it yet.