Motion tracking
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello, we have got the nc450. In the product description it says, that it has motion tracking. When motion is detected it shall follow the object and record it. But I cannot find the settings. Can you help me?
Thanks and best regards Stefan
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thanks for your reply, I got your point.
The NC450 does not support motion tracking, which KC110 supports.
The NC450 can detect the motion activity and record it. But it won't follow the moving object.
May it help.
- Copy Link
- Report Inappropriate Content
Hello, below is the instruction to setup the motion detection via the tpCamera app.
https://www.tp-link.com/support/faq/1563/
You can follow it and give it a go.
May it help.
- Copy Link
- Report Inappropriate Content
Hello,
Thank you for you answer. But i am Not referring to the recognition of movement, but to the persecution . The camera should follow a moving object. Greetings, Stefan
- Copy Link
- Report Inappropriate Content
Thanks for your reply, I got your point.
The NC450 does not support motion tracking, which KC110 supports.
The NC450 can detect the motion activity and record it. But it won't follow the moving object.
May it help.
- Copy Link
- Report Inappropriate Content
you can try other tracking devices. if you continuous face problem
- Copy Link
- Report Inappropriate Content
I know for a fact that the NC450 does support motion tracking. I have 4 NC450 since more than a year, two of which are configured with motion tracking upon audio/motion detecting.
However, I cannot find the setting in the tpCamera app so I have no way to enable motion tracking on the other two, or disable motion tracking for that matter.
Anyone knows if the feature has been disabled with recent updates?
P.S. I do know the difference between motion detection and motion tracking.
- Copy Link
- Report Inappropriate Content
Good day,
I am afraid that Tapo Cam does not support motion tracking, it support Pan/Tilt, motion detection, not the combination of them.
For the motion tracking, it is more like: the camera detected something was moving, then it would move with the motion so that it would record the whole action.
As for the motion detection, the direction of the camera would be fixed and it could only record part of the action.
Thanks a lot.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2996
Replies: 6
Voters 0
No one has voted for it yet.