Can I cut and Wire Nut this connection to HS200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can I cut and Wire Nut this connection to HS200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AdaminLondon

2020-12-19 21:42:08 - last edited 2020-12-20 23:28:24

Posts: 11

Helpful: 12

Solutions: 0

Stories: 0

Registered: 2020-12-19

Can I cut and Wire Nut this connection to HS200

2020-12-19 21:42:08 - last edited 2020-12-20 23:28:24

Model: HS200

Hardware Version:

Firmware Version:

I think I know the answer but I don't want to be wrong. The line wire is stripped and wrapped around the screw terminal, and then continues to the next switch. Obviously I can't connect the wiring to the HS200, so my thought it to simply cut it and connect the 2 ends to the HS200 switch.

Does anyone see any issues with this?

pics attached:

Far left switch is 3-way, and the line only connects the middle and right switch.

I've already installed one HS200 from the right switch, and wired the line coming in, and the line going back down the circuit together with no issues.

thanks. Adam

1 Accepted Solution

B.Will

LV3

2020-12-19 22:08:47 - last edited 2020-12-20 23:28:24

Posts: 398

Helpful: 375

Solutions: 33

Stories: 0

Registered: 2019-06-17

Re:Can I cut and Wire Nut this connection to HS200-Solution

2020-12-19 22:08:47 - last edited 2020-12-20 23:28:24

@AdaminLondon Yes you can cut it and connect the 2 wires with one of the HS200 leads, then take the other wire off the switch and connect it to the other HS200 lead.

I see in the box you have a group of neutrals that you can add the white of the HS200 to.

Can I cut and Wire Nut this connection to HS200

Can I cut and Wire Nut this connection to HS200

Information

Voters 1

Tags