@Solla-topee hi! thank you for the reply . before you sent me the video I did the factory reset. The camera blink red and then bip after the 5 seconds. I did that multiple times. I try 2 different phones, not showing up the Tapo Camera XX default SSID. Now what it does is the red and green blinking. I plug it in, the camera turns on, red led on, moves to one side, another, up and down, then blinks red and green but it does not shows up in the net.

@DiegoARG You have described all the correct operation of the camera. And what you mention has also happened yo me in a c100 and c200. These cameras connect very well when they are already linked to the tplink account and you can move them further away (very high ceiling, more walls, glass) But... I do not recommend that you delete them from your account and link them again at any time or ... In that case you have to remove it from the far place and do it as close to the router snd with a lot of patience until yoj recognize it later you will no longer have problems.