Kasa and Bell HomeHub 4000
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I recently upgraded to bell fibre internet and received a Homehub 4000 from bell.
Everything is going pretty good except for my kasa switches that lose connection all the time.
I have the switches on the guest network and it looks like they use the same band as the main 2.4 network? I have tried disabling whole home internet and playing with the bands(using a wifi scanner) without success.
is anyone else using kasa switches with HH4000? Any issues?
I tried to setup one of the kasa switch to the main network but had the same issue. My next step is to disable the guest network and see what happens. I'm trying to avoid having to reconfigure all my switches because its a pita to change dozens of them...
btw I was using all these devices before on a tp-link N600 router without issues...
Seems others are having the same issue based on a thread I had started on redflagdeals forum
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @FrancoisL
thank you for your feedback, if the issue started since the change of router,please try to reach Homehub support and see if have any suggestions?
For kasa unstable issue, try to turn off band-steering/ Wi-Fi or channel optimization or other wireless advanced settings and see if that helps
You could consider connect old router to the Home hub router and use it as an Access Point , and connect kasa devices to the old router (AP) and see if that helps.
How to configure the TP-Link wireless router as Access Point?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thanks, do you find that your issues are linked to running the guest network as well?
I aslo found this thread by someone else who seems to have issues. Not sure if a resolution has been posted for it.
https://community.tp-link.com/en/smart-home/forum/topic/272428?replyId=623240
- Copy Link
- Report Inappropriate Content
The options to change Wi-Fi in the 4000 are very limited.
Plus, I did not want to turn off band steering and other features as they are working great for Globe, GEENI/Merkury, DLink, GOOGLE, Meross, etc. The products from these IOT vendors never worked better.
So just for TP-Link KASA, I had to put back the TP-Link Mesh M9Plus Wi-Fi extender and create a separate, 2.4 GHz only Wi-Fi network just for them.
Now they have no issues, are fast and only occasionally show up as disconnected in GOOGLE Home.
A pain to be sure but I have quite a few plugs, switches and lights and cannot pay to replace them all at once.
Yes, I said replace because if TP-Link cannot get them to handle modern Wi-Fi like everyone else, I will slowly start replacing them and sell them on eBay.
- Copy Link
- Report Inappropriate Content
@TheRealDPP Ok so I am not crazy. I have the exact same problem with HS220 plugs. Had Google Wifi before. No issues. Then moved to HH 4000 and atarted having stability issues with only those switches. The rest of my devices all work great.
Will TP-Link do something about it? It seems pretty clear the issue is unique to their devices.
- Copy Link
- Report Inappropriate Content
Hello @Mayoo
Thank you for the feedback, this seems to relate to with certain router and could relate to how the Bell home hub handle the request from Kasa devices. I'd recommend to reach router support and see if they could help check router in logs and help with some further troubleshooting.
Or you could consider the workaround of using the old router as the Access Point and create a Wi-Fi network dedicated for the Kasa devices.
Thank you for your understanding.
- Copy Link
- Report Inappropriate Content
@FrancoisL i have the same issues 😔
I dont want buy a second router to connect my switch. I'm going to change my switch (2)
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 2224
Replies: 7
Voters 1
