Home

Forums

Stories

Knowledge Base

Smart Home Community > Tapo Smart Camera > How can I connect my Tapo c200 to my Reolink NVR RLN8-410.

< Tapo Smart Camera

How can I connect my Tapo c200 to my Reolink NVR RLN8-410.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How can I connect my Tapo c200 to my Reolink NVR RLN8-410.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Hansja

2023-11-29 22:59:20 - last edited 2023-12-08 09:23:56

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-11-29

How can I connect my Tapo c200 to my Reolink NVR RLN8-410.

2023-11-29 22:59:20 - last edited 2023-12-08 09:23:56

Model: Tapo C200

Hardware Version:

Firmware Version:

How can I connect my Tapo c200 to my Reolink NVR RLN8-410?

I choose an ONVIF camera, I then enter the correct IP address (found via the TAPO app),

my username and password and I have tried it via the ports: 80, 8080, 554, 2020 and 9000,

but I get no connection characters. wrong. So viewing via the app works fine.

If I go directly to the IP address on the PC (tried with different port numbers),

I get the message that it cannot be reached.

If I try it via the VLC player (stream) it works on the correct IP address (rtsp://192.168.2.13//stream2)

so the IP address is definitely correct.

What is wrong?

Regards,

Hans

1 Accepted Solution

Solla-topee

2023-11-30 07:40:41 - last edited 2023-12-08 09:23:56

Posts: 13370

Helpful: 2304

Solutions: 1925

Stories: 8

Registered: 2020-05-19

Re:How can I connect my Tapo c200 to my Reolink NVR RLN8-410.-Solution

2023-11-30 07:40:41 - last edited 2023-12-08 09:23:56

@Hansja

Hi,
If you can stream the Tapo C200 on the VLC player, it means the settings on the Tapo C200 are correct.

You can refer to the link below to configure some basic parameters that it may require to connect the Tapo camera to your NVR, and it's suggested to contact NVR support or visit their official website to find the instructions to add the camera to your NVR since different NVR devices may have different configuration methods.
How can I connect my Tapo camera to a NAS or NVR?

Note:
1) If your Tapo C200 and the NVR are in different networks, it's required to open ports 554 or 2020 on your modem/router for the camera, and the IP address to stream the camera via RTSP/ONVIF on the NVR should be the public IP address on your modem/router.
2) The Tapo C200 does not have a web UI, and it's unable to access it by typing the IP address on a browser's address bar on a PC.

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

How can I connect my Tapo c200 to my Reolink NVR RLN8-410.

How can I connect my Tapo c200 to my Reolink NVR RLN8-410.

Information

Voters 0

Tags