My system not working after last hub firmware update
My system not working after last hub firmware update
After the last hub firmware update my system keeps crashing, reloading, resetting. Can barely access camera feeds as it keeps loading and resetting. Same for recorded videos
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I have the same problem after the latest update. Will you release a new update or what's the solution?
- Copy Link
- Report Inappropriate Content
We have the same problem after last update. Hub has big problem find mSD card, after reset and format start working, but videos from our doorbell are only saved - if i want play it, network error is only showed in the app. Before update hub works fine.
- Copy Link
- Report Inappropriate Content
@MDDW I am having the same problem. I have actually removed one of the two cameras I had attached to the hub and now cannot reattach it. I have done all the troubleshooting steps I can, resetting the camera, rebooting the hub, nothing works so now I'm down a camera... I cannot access any live feed, playback, downloads on the cameras at all (with their own mSD cards). Devices not attached to the hub are working just fine.
- Copy Link
- Report Inappropriate Content
@MDDW
I'm also having the exact same issues with:
Model: Tapo H200
Hardware Version: 1.0
Firmware Version: 1.3.4 Build 20240621 rel.40453
I'm getting a constant "unstable network" error and can barely play live video. I can almost never access recordings. I've tried formatting the SD, resetting the hub, lowering settings for bandwidth and nothing works. On top of this, I actually have a spare H200, exact same issue, no issues before the firmware update.
Please push a new firmware soon or at the very least give us a way to roll back.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
We noticed that many users are concerned about the issues discussed in this thread. Please review this solution article first to check whether it matches the problem that occurred on your camera. Can't Watch Playback or Camera Blinking Red When Watching Liveview after Updating H200 to 1.3.4
If at any point your camera does not match what is described in this solution, please post a new thread or leave a comment with details of your case. Partially similar symptoms do not necessarily indicate the same cause. Addressing them together or simply saying "same problem" without further details may hinder effective advice or solutions.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 45
Views: 1376
Replies: 18
Voters 3
