This Article Applies To

Tapo C425 (EU/US) V1.0 - Firmware 1.3.9 Build 240701 Rel.67934n

Tapo C425 (EU/US/KR) V1.20 - Firmware 1.2.23 Build 241119 Rel.70306n

Tapo H200 (EU/US/JP) V1.0 - Firmware 1.3.5 Build 20240726 rel.48294

Introduction

Tapo C425 now supports connection with Tapo H200 hub, offering an additional network connection option and enabling video storage.

1. Support Tapo C425 connect H200 hub, saving both WiFi and hub connection as network options, allowing the camera to switch to the optimal network automatically.
2. The Tapo C425 can store video on the MicroSD card in the Tapo H200 hub.

How to connect C425 to H200 hub and select network priority?

1. Open Tapo App, go to Tapo C425's device page, go to Device Settings.

2. Click Network Connection -> Network Priority.

3. Enable Network Priority.

4. Click Hub AP to connect Tapo C425 to a H200 hub. 

5. Choose network priority: Auto, Router Priority, or Hub AP Priority.

6. Save.

How to change Tapo C425's local video storage to the H200 hub?

*Make sure both C425 and H200 hub are connected to the same local network.

• Method One

1. Open Tapo App, go to Tapo C425's device page, go to Device Settings.
2. Click Storage& Recording -> Local Storage.
3. Click Storage Location, choose Hub Storage. Click "Save To", choose a Tapo H200 hub for camera video storage.
4. Save.

• Method Two

1. Open Tapo App, go to H200's device page, click Connected Device.

3. Switch to the Accessible tab, click Manage -> select Tapo C425.

4. Choose Network Priority and Storage Location.

5. Done. 

Note

1. Local videos can only be saved to one location: you can choose to save them either to the camera's SD card or to the hub's SD card.

2. To save video to the hub, the camera does not require a connection to the hub. It is recommended to save both connection methods so that the camera can automatically switch networks during poor connectivity to ensure proper video storage.