Tapo C210 firmware not updating
Tapo C210 firmware not updating
I got 2 c210. One of them is updated to 1.4.2 while the other one still is in 1.3.11 and shows no update whenever i check for firmware update. Bought both of them together as well. Why is your system so laggy and glitchy? Is there a way to push the update manually?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Updated on Dec 31, 2024.
Hi All,
The new firmware(1.4.4) of the Tapo C210 is being released now, some Tapo C210 cameras detect the new firmware but some do not because we release the firmware gradually. We suggest waiting patiently for the new firmware to be fully released if there is no problem with the current version.
Best Regards
- Copy Link
- Report Inappropriate Content
Updated on Dec 31, 2024.
Hi All,
The new firmware(1.4.4) of the Tapo C210 is being released now, some Tapo C210 cameras detect the new firmware but some do not because we release the firmware gradually. We suggest waiting patiently for the new firmware to be fully released if there is no problem with the current version.
Best Regards
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
In this situation, it's recommended to wait for the new firmware to be released to your camera officially.
Best Regards
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
Sorry that we do not have this information. You can pay attention to the notice on the Tapo app > Me >Firmware Update page.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi
I've just purchased 4 C210s and I'm also stuck on version 1.3.11. I do have problems as I'm not able to use and control them in Home Assistant as I would like.
It keeps yelling my I've used the wrong cloud password 😟
- Copy Link
- Report Inappropriate Content
Hi,
Since the Tapo camera has not officially collaborated with HomeAssistant, no changes or designs are made to the camera specifically to adapt to HomeAssistant.
If you want to watch the camera's live feed through RTSP/ONVIF on HomeAssistant, please refer to the instructions below.
How to view Tapo camera on PC/NAS/NVR through RTSP/Onvif Protocol
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee possible to push the update for the other camera? it seems to be acting weird with the old firmware and the new firmware is long due now.
- Copy Link
- Report Inappropriate Content
Hi,
Please send me(@Solla-topee) "Forum 704834+Tapo C210's MAC address" via a private message if you want to update the firmware to v1.4.2 soon.
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee Have shared the details via private message. Please let me know once the update has been pushed. Thank you
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 1007
Replies: 13
Voters 1