Smart Home Community > Tapo Smart Camera > Can Tapo D230S1 have multiple H200 hubs to have multiple chimes?
< Tapo Smart Camera

Can Tapo D230S1 have multiple H200 hubs to have multiple chimes?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can Tapo D230S1 have multiple H200 hubs to have multiple chimes?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can Tapo D230S1 have multiple H200 hubs to have multiple chimes?
Can Tapo D230S1 have multiple H200 hubs to have multiple chimes?
2024-12-31 18:01:17 - last edited 2025-01-07 08:54:31
Model: Tapo D230S1  
Hardware Version: V1
Firmware Version: 1.1.19

Hi there,

 

I have a large house and when someone rings the doorbell I need to hear a chime in multiple places throughout the house. At the moment I only have one H200 hub which chimes and that too for a very short time. Is it possible to have multiple H200 hubs throughout the house that will all chime when the doorbell is pressed or some other solution to this problem? This is a fundamental requirement that many people must have.

 

Thanks.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Can Tapo D230S1 have multiple H200 hubs to have multiple chimes?-Solution
2025-01-02 07:24:33 - last edited 2025-01-07 08:54:31
▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#3
Options
3 Reply
Re:Can Tapo D230S1 have multiple H200 hubs to have multiple chimes?
2024-12-31 23:22:26

Hi  @Narada 

 

I've just had a quick look at my setup to check, and I believe this works.

 

Whilst this may not be possible under 'paired chimes' for the doorbell itself, you *could* I think create an automation.

 

i.e;

 

Trigger -> When doorbell X is pressed

Then -> Activate hub chimes A, B and C

 

You could even the set different time slots. e.g. 8 till 8 ... ring every hub in the house. After that point (via a different automation), only ring the ones downstairs.

Not ideal, but it may at least function.

 

HTH

 

TG

  1  
  1  
#2
Options
Re:Can Tapo D230S1 have multiple H200 hubs to have multiple chimes?-Solution
2025-01-02 07:24:33 - last edited 2025-01-07 08:54:31
▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#3
Options
Re:Can Tapo D230S1 have multiple H200 hubs to have multiple chimes?
2025-01-04 23:32:01

Thank you all. I will try your suggestions.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1261

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.