Smart Home Community > Tapo Smart Hub > Tapo Hub H200 constant red light
< Tapo Smart Hub

Tapo Hub H200 constant red light

Tapo Hub H200 constant red light

Tapo Hub H200 constant red light
Tapo Hub H200 constant red light
2025-08-30 07:33:31 - last edited 2025-09-19 03:30:43
Tags: #Device Connectivity
Model: Tapo H200  
Hardware Version:
Firmware Version:

I am unable to do a hard or soft reset of my H200 hub. Pressing the reset button for any number of seconds doesn't trigger a reset - light stays constantly red. I've unplugged the unit multiple times. 
 

I don't have a microSD card in the slot and both the camera (D230S1j and hub are disconnected from the Tapo app.  Camera is ready to pair (flashing red / green). 
 

help!

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Tapo Hub H200 constant red light-Solution
2025-09-01 03:26:04 - last edited 2025-09-19 03:30:43

  @Sheffy 

 

Is the hub still wired to the router? In this case, the LED might be amber rather than red. Solid amber indicates that the hub is connected to the router and is ready for configuration.

 

If the led is indeed red, since it does not respond to reset, this device might need to be replaced. For warranty assistance, contact the retailer or local TP-Link support. 

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Tapo Hub H200 constant red light-Solution
2025-09-01 03:26:04 - last edited 2025-09-19 03:30:43

  @Sheffy 

 

Is the hub still wired to the router? In this case, the LED might be amber rather than red. Solid amber indicates that the hub is connected to the router and is ready for configuration.

 

If the led is indeed red, since it does not respond to reset, this device might need to be replaced. For warranty assistance, contact the retailer or local TP-Link support. 

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
Recommended Solution
  0  
  0  
#2
Options
Re:Tapo Hub H200 constant red light
2025-09-02 02:51:53

  @Wayne-TP 

 

I've tried resetting the Hub both when it was connected as well as disconnected from the router via an ethernet cable.  I've also reset my camera and it's flashing amber + green and the amber on the camera looks very different than the red on the hub so I'm going to assume the hub is faulty.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 389

Replies: 2

Tags

Device Connectivity
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.