Smart Home Community > Kasa Smart Switches > KS220M dying out of nowhere
< Kasa Smart Switches

KS220M dying out of nowhere

KS220M dying out of nowhere

KS220M dying out of nowhere
KS220M dying out of nowhere
2 weeks ago - last edited 2 weeks ago
Model: KS220M  
Hardware Version: V1
Firmware Version: 1.0.11 Build 240514 Rel.110351

I have the exact same issue as described in this previous post:
https://community.tp-link.com/en/smart-home/forum/topic/641150

 

I'm disappointed to see that there was no answer resolving the issue from 2 years ago.

 

I currently have several KS220M installed in three bathrooms in my house. Everything works for a while, but then they just stops working (never all at the same time. When this happens, it's like the affected dimmer's hardware has crashed. Even the physical buttons do nothing, Nothing works. ie. If I attempt to trigger it using the motion sensor, the physical button, or the app and the light doesn't change states (sometimes it is stuck off, other times it is stuck on). It continues to look online in the app.

When I press the restart button on the right, bellow the main switch, the switch reboots and works again for a while.

 

This is happening often enough that I may have to remove them.  🙁

 

Has anyone else had this same issue and found a fix?

  0      
 
  0      
 
#1
Options
4 Reply
Re:KS220M dying out of nowhere
2 weeks ago

  @GervaisdeM 

 

What are the firmware version of your KS220Ms? Are they all 1.0.11 Build 240514 Rel.110351? How long have you been using them?

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  0  
  0  
#2
Options
Re:KS220M dying out of nowhere
Saturday

I have 2 KS220M also behaving the same. 

Hardware version: 1.0

Firmware version: 1.1.6

 

Tried a full reset, but that did make a difference.

  0  
  0  
#3
Options
Re:KS220M dying out of nowhere
34 minutes ago - last edited 33 minutes ago

I have the same problem, the dimmer freezes and is unresponsive until the restart button is pressed.

I even added a home assistant automation to reboot it twice a day, it did not help.

 

It can freeze while on or off, I have seen both.

 

I have 2 of them and both do the exact same thing.

 

KS220M

Hardware version 1.0

Firmware 1.1.6

 

P.s. no problems with HS220 or HS200

  0  
  0  
#4
Options
Re:KS220M dying out of nowhere
8 minutes ago

  @Wayne-TP 

 

They were all running the same 1.0.11 firmware, but I have since upgraded all of them to the latest firmware. 

 

Model: KS220M
Hardware Version: 1.0

Firmware Version: 1.16 (upgraded since first post)

 

As for how long I have been using these devices:

  1. KS220M first joined your network on February 2, 2025 at 8:26 PM
  2. KS220M first joined your network on February 2, 2025 at 7:56 PM
  3. KS220M first joined your network on February 9, 2025 at 5:06 PM
  4. KS220M first joined your network on February 15, 2025 at 5:22 PM

 

Things seem better since the latest firmware, but I have experienced the issue described in my first post a few times.

 

Thanks for any help you can provide.

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 650

Replies: 4

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.