Sugestão de melhoria
O aplicativo de vocês é quase perfeito. Para ficar ainda melhor, sugiro dar a opção de criar zonas detecção separadas. Uma para gravar vídeo e outra para alarme. No meu caso pego metade da tela com a área interna do meu quintal, a outra metade pego a visão da rua. Queria gravar apenas na parte da tela que mostra a rua, e na outra metade de dentro, no quintal, gravar e acionar o alarme. Isso só seria possível se vocês implementassem a opção de zonas com ações personalizadas. Seria muito bom
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Please describe a more detailed usage scenario for your feature request. For example, do you want the camera to record the full screen continuously? Or do different zones have different recording settings? Do you want the camera to alarm when any event occurs inside the yard, or only when a specific event is detected, such as a person, then the camera alarms?
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee it’s quite simple: just add a new customized area (when we draw on the screen to select an area) and allow this area to have the alarm + recording option.
Currently, it’s only possible to select two areas: one for people and another for motion, with the alarm restricted to these two settings.
In my case, I have two sectors within the camera’s field of view: one inside the yard and another outside. I’d like the outside area to only record videos, while the inside area, besides recording, would also trigger the alarm.
This would prevent the alarm from going off all the time and ensure it only activates when someone actually crosses the wall.
Please make It 🙏🏻🙏🏻🙏🏻
- Copy Link
- Report Inappropriate Content
@Solla-topee In the "alarm" function, include an option called "draw alarm detection area" and also a checkbox that says: "when this item is enabled, the alarm will only be triggered within the drawn detection area. If you don’t draw a specific area, the alarm will work across the entire detection screen (default mode).
That would be perfect. Please implement this. I am very happy with your equipment.
- Copy Link
- Report Inappropriate Content
Kronno wrote
@Solla-topee it’s quite simple: just add a new customized area (when we draw on the screen to select an area) and allow this area to have the alarm + recording option.
Currently, it’s only possible to select two areas: one for people and another for motion, with the alarm restricted to these two settings.
In my case, I have two sectors within the camera’s field of view: one inside the yard and another outside. I’d like the outside area to only record videos, while the inside area, besides recording, would also trigger the alarm.
This would prevent the alarm from going off all the time and ensure it only activates when someone actually crosses the wall.
Please make It 🙏🏻🙏🏻🙏🏻
Hi,
For the usage scenario you mentioned in this post, if the camera has an SD card inserted, you can configure the following settings:
1. Set the camera to record video continuously.
How can I store the Tapo camera video recordings on a microSD card
2. Enable Person Detection and set a detection zone (inside the yard) for it.
3. Enable the Alarm feature: How to configure the Alarm feature for Tapo Cameras on the Tapo app
Then the camera will record video all the time, and only alarm when someone is detected within the detection zone.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 101
Replies: 4
Voters 0
No one has voted for it yet.