Tapo C460 charging to 98% connected to wall charger
Hello.
i just bought a new Tapo C460 kit (with solar panel) and I'm trying to charge it to 100% before puting it outside with the panel, but it has been connected to my iPhone charger and its only reaching 98%.
hoy do I make it to a 100%? I want to be outside fully charger to mesure the battery will last at lo g as possible.
thanks for the help
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The camera's operating hours can certainly be extended when it is used with a solar panel, as long as it is not in high-frequency operation.
As for this charging anomaly, if you want to find out what's happening, I recommend consulting our support team. Contact Technical Support
- Copy Link
- Report Inappropriate Content
When using a 5V 2A charger, it takes approximately 5.5 hours to fully charge the camera. If the charger you used has a lower output, it will take longer.
What's the output of the charger you used? And how long did you charge the camera?
- Copy Link
- Report Inappropriate Content
Thanks for your answer.
Im using a regular iPhone charger:
-
Frequency: 50-60 Hz, single-phase
-
Line Voltage: 100-240 V AC
-
Output Voltage/Current: 9 V DC/2.2 A Minimum
-
Output Power: 20 W
-
Output Port: USB-C
Link Apple Product
It had it connected for more than 6 hours. It reached 98% but not a 100%.
The camera has been running with the solar panel for 2 days and it has not decreased the battery charge... but I want it to be at a 100% to ensure it will last more.
Thanks for the help.
- Copy Link
- Report Inappropriate Content
The camera's operating hours can certainly be extended when it is used with a solar panel, as long as it is not in high-frequency operation.
As for this charging anomaly, if you want to find out what's happening, I recommend consulting our support team. Contact Technical Support
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 192
Replies: 3
Voters 0
No one has voted for it yet.