Tapo C246D Bottom Camera Keeps Rotating and Non-Responsive
I just got my Tapo C246D and noticed that the bottom camera keeps randomly panning.
When the bottom camera is rotating, the RTSP streams and control from the app is inaccessible.
I have disabled smart tracking, so the bottom camera should not pan or tilt.
I also have a strong WiFi connection, I can see that the camera signal is -46dBm.
In my router, I can see that the device has had no reconnections.
What could possibly be the problem?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
From your description, it seems the camera is randomly rebooting, so it's panning. If the phenomenon occurs only when the camera is in Night mode, it's recommended to confirm whether the camera is powered by the original power adapter and USB adapter cable that come with the camera in the box. Using other power adapters or an extension power cable may affect the camera's performance.
Best regards
- Copy Link
- Report Inappropriate Content
Hardware Version:1
Firmware Version: 1.1.2
- Copy Link
- Report Inappropriate Content
It appears that this only happens when auto night mode is enabled.
- Copy Link
- Report Inappropriate Content
Hi,
From your description, it seems the camera is randomly rebooting, so it's panning. If the phenomenon occurs only when the camera is in Night mode, it's recommended to confirm whether the camera is powered by the original power adapter and USB adapter cable that come with the camera in the box. Using other power adapters or an extension power cable may affect the camera's performance.
Best regards
- Copy Link
- Report Inappropriate Content
@Solla-topee same to me its rotating not stopping same senario how it resolve it please help us i buy it device last week only
- Copy Link
- Report Inappropriate Content
@Froi3us give us solution this problem i had 2 C211 but no problm other wise i buy this for my garage but now it not work properly signal always down blinking red green am from phillippines
- Copy Link
- Report Inappropriate Content
Hi,
1. Please ensure you have powered on the Tapo C246D with the original power adapter and cord that came with the camera.
2. If the system LED on the C246D is flashing red and green, it means the camera is not successfully configured. You can press and hold the reset button on the camera for 10 seconds to perform a factory reset, then reconfigure it and check whether it works.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 535
Replies: 6
Voters 0
No one has voted for it yet.