Tapo C200 camera issue
The camera is not focusing to the default position set, it automatically stay focus to a different point, which is very abnormal
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Usually, if you pan & tilt the camera manually in the Tapo app, the camera won't automatically move to other viewpoints. If you have enabled the motion tracking feature, the position where the tracking starts is the original position. After tracking, the camera will turn to it if no new event is detected.
In your situation, why did you set the default position? For example, is this the position you want the camera to return to after tracking?
Best Regards
- Copy Link
- Report Inappropriate Content
Hi
Thanks for reverting!
Yes in my I want the camera to stay focus in a perticular position,only when it detects any Motion/ Sounds then it move towards the motion area and after few time it should come back to the original position (which is my default position).
In my case it was working exactly as above since last few years but since last few months it's having some issues, it doesn't stay in the default position as a result I am not getting any event recording.
- Copy Link
- Report Inappropriate Content
Hi,
Is the phenomenon that the camera's viewpoint moves automatically even when it is not tracking events, or after the camera tracks an event, it does not return to the correct position?
Have you shared your camera with other accounts so the other person can pan & tilt it in the Tapo app?
Best Regards
- Copy Link
- Report Inappropriate Content
Hi
it's not shared to anyone I am the only account holder who monitor the recordings, n
No it only moved when detects motion/ objects but the problem is it never came back to original position, and as I said this is happening recently like 30 to 40 days earlier it was running perfectly fine
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 48
Replies: 4
Voters 0
No one has voted for it yet.