Whats the wifi password to connect to the camera?
Whats the wifi password to connect to the camera?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
The camera's default SSID does not require a Wi-Fi password to connect; it's an unsecured Wi-Fi network. Usually, a Wi-Fi password is required only when connecting the camera to your router's Wi-Fi, and it's your router's Wi-Fi password.
Below are the detailed steps to configure the Tapo camera.
How to set up the Tapo camera
Best Regards
- Copy Link
- Report Inappropriate Content
Hi, thank you for your answer.
The camera has a red light blinking, when i look for a SSID with the format Tapo_Cam_XXXX there's nothing even similar.
I tried other SSIDs but they all ask for password so i assume none of these are the camera.
Never mind, i found a video how to reset the camera, it was still trying to connect to the old wifi, a reset was the solution. thanks
- Copy Link
- Report Inappropriate Content
Hi,
Usually, you can press and hold the reset button on the camera for 10 seconds to perform a factory reset. After that, if the camera has a flashing green and red light, you can check whether the camera's default SSID (Tapo_Cam_XXXX) is available.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 71
Replies: 3
Voters 0
No one has voted for it yet.