> Hello,

I have a Tapo C510W camera. During a firmware update, the power was accidentally disconnected before the update completed.

Now the camera only shows a solid red LED and does not boot normally. It cannot be detected in the Tapo app, and pressing the reset button for more than 10 seconds does not help.

I have already tried:

Power cycling the camera

Holding the reset button multiple times

Waiting several minutes after powering on

The camera was purchased in South Korea and is currently being used in Uzbekistan.

Is there any recovery procedure, recovery firmware, or method to restore the camera?

Thank you.

Model: Tapo C510W

Hardware Version (H/W Ver.)

Serial Number (S/N)