Home Network CommunityDecoWireguard with Deco BE65 and Deutsche Glasfaser
Deco

Wireguard with Deco BE65 and Deutsche Glasfaser

Wireguard with Deco BE65 and Deutsche Glasfaser

Wireguard with Deco BE65 and Deutsche Glasfaser
Wireguard with Deco BE65 and Deutsche Glasfaser
Monday - last edited Yesterday
Tags: #WireGuard #VPN
Model: Deco BE65  
Hardware Version: V2
Firmware Version: 1.3.2 Build 26040912 Rel. 40631

Hello everyone,

 

I have two BE65 and two X1500, my internet provider is Deutsche Glasfaser.

I try to set up Wireguard, I follow the steps as described in the app. If I then turn on Wireguard, a connection to the router is established,

but I get nevertheless not on the Internet. Are there any settings in the app outside of Wireguard that I need to pay attention to?

 

Greetings Dave

  0      
0
#1
Options
3 Reply
Re:Wireguard with Deco BE65 and Deutsche Glasfaser
Yesterday

  @DaveSisko 

Hi,
You can refer to the instructions below to troubleshoot.
Troubleshooting VPN Issues on Deco
 

Please confirm the following information if the same phenomenon persists.
  1. Have you configured WireGuard VPN Server or Client on the Deco?
  2. Please list the troubleshooting you did.

 

Best Regards

>> Check What's Currently Going on With Deco >> Deco X50/X50Pro/X50-PoE Pre-Release Firmware 1.7.0 Introduces DoH/DoT, Channel Selection, and More! >> Deco XE75/XE5300/XE75Pro V1 Pre-release Firmware 1.5.0 Introduces DoH/DoT, WireGuard VPN, and More!
  0  
0
#2
Options
Re:Wireguard with Deco BE65 and Deutsche Glasfaser
Yesterday

  @Solla-topee 

Hi, so I would like to use the Deco as a Wireguard server. This works without any problems with my FB7690. With the Deco I have now tried everything I could find in terms of help on the Internet, but I just can't access the Internet when Wireguard is set up. Actually, the setup should be very easy, I even took the TP Link DDNS, but it just doesn't work. Maybe you should also think about a brewable browser interface for the decos.

  0  
0
#3
Options
Re:Wireguard with Deco BE65 and Deutsche Glasfaser
13 hours ago

  @DaveSisko 

Hi,
For the reported phenomenon, please confirm the following information for further analysis.


  1. Are you successfully connecting to the WireGuard VPN server on the Deco from a remote PC, and the PC can access the Deco internal network but cannot access the internet? If not, please describe your network diagram in detail.
  2. On the Deco app > More > Internet Connection page, you can check the IPv4 address and please send it to me (@Solla-topee) via a private message.

  3. On the Deco app > More > VPN > your WireGuard VPN Server settings page, have you selected "Internet and Home Network" on the Client Access option?

 

Best Regards

>> Check What's Currently Going on With Deco >> Deco X50/X50Pro/X50-PoE Pre-Release Firmware 1.7.0 Introduces DoH/DoT, Channel Selection, and More! >> Deco XE75/XE5300/XE75Pro V1 Pre-release Firmware 1.5.0 Introduces DoH/DoT, WireGuard VPN, and More!
  0  
0
#4
Options

Information

Helpful: 0

Views: 81

Replies: 3

Tags

WireGuard VPN