How to connect the ground green wire from the Kasa smart switch KS 205/225
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to connect the ground green wire from the Kasa smart switch KS 205/225
Tags:
#Installation
Hello,
how do I connect the ground wire from the Kasa smart switch KS205?
my old switch doesn't have a ground wire but I see there are two ground wires at the screws at the junction box.
see photo above on the left.
do I connect the switch ground wire to any of the two screws with ground wires or is it a specific one?
thanks
Re:How to connect the ground green wire from the Kasa smart switch KS 205/225
Neutral connection
all junction boxes are grounded. The left box has two copper wires under the screws as shown in the photo but no ground wire coming out to the switch.
the 2nd box ( and 3rd and 4th not shown) has a ground wire coming out of the box and being attached my old switch at the bottom.
Can you verify if below connections are correct
Caption