NC450 admin Password Reset Not Working

NC450 admin Password Reset Not Working

NC450 admin Password Reset Not Working
NC450 admin Password Reset Not Working
2024-10-22 07:27:40 - last edited 2024-11-01 09:59:01
Model: NC450  
Hardware Version: V1
Firmware Version:

Please help to reset the password. I try to press WPS/RESET button for about 15 sec and solid Red Light already appear but still not reset to factory and not able to login the admin password.

  0      
  0      
#1
Options
1 Accepted Solution
Re:NC450 admin Password Reset Not Working-Solution
2024-10-23 07:34:08 - last edited 2024-11-01 09:59:01

  @GlennM 

Hi,
1. With the camera powered on, please press and hold the WPS/Reset button for 10 seconds until the System LED turns off. Then release the button and wait for the camera to reset to its factory default settings.
Please pay attention to the LED status when resetting the camera, and send the LED state changes to me if you fail to reset it.

 

2. If you reset the camera successfully, you can refer to the instructions below to reconfigure it. As you can see in Step 5, the app will ask you to set a new password rather than use admin to access your camera.
How to set up a cloud camera with tpCamera APP
 

3. If you fail to log in to the tpCamera app, you can refer to the attached instructions to try to log in to the camera's Web UI to change the login username and password.

 

Best Regards

File:
NC450 – Change username & password through Web UI (Windows OS).pdf.pdfDownload
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:NC450 admin Password Reset Not Working-Solution
2024-10-23 07:34:08 - last edited 2024-11-01 09:59:01

  @GlennM 

Hi,
1. With the camera powered on, please press and hold the WPS/Reset button for 10 seconds until the System LED turns off. Then release the button and wait for the camera to reset to its factory default settings.
Please pay attention to the LED status when resetting the camera, and send the LED state changes to me if you fail to reset it.

 

2. If you reset the camera successfully, you can refer to the instructions below to reconfigure it. As you can see in Step 5, the app will ask you to set a new password rather than use admin to access your camera.
How to set up a cloud camera with tpCamera APP
 

3. If you fail to log in to the tpCamera app, you can refer to the attached instructions to try to log in to the camera's Web UI to change the login username and password.

 

Best Regards

File:
NC450 – Change username & password through Web UI (Windows OS).pdf.pdfDownload
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 252

Replies: 1

Related Articles