@Eddy2007 Short answer: as long as it works, no need to try anything else. Longer answer: With Deco mesh, Satellite Deco decide on their own how to connect and, in most cases, they prefer connection...

@Erle In networking terms, this is what you have: Router #1 - Your Internet modem/router Router #2 - Main Deco X20-4G The question you ask is why device (such as RaspberryPI) connected to Router #1...

DeckOh wrote I'm using access point mode, so was not affected by this issue which is why 1.7.0 is working fine for me (and why I wouldn't mind updating my remaining units to 1.7.0 so they all have...

@Eddy2007 I can see the screenshot, thanks. Yes, that would be the test: take Office Deco and place it in garage. When you power it off, wait till it shows as offline in Deco app. After you power...

@JohanB1971 If you are confident your wired Deco units do use Ethernet for backhaul, I am out of ideas, sorry. The only thing I can suggest is when "waves" are coming - check if Satellite Decos...

@Eddy2007 The answer to "if I add another deco or two in the garage/garden, will they have a good enough signal": it depends. If you have three Deco units at your house, you can test that before...