@JohanB1971 Deco P7 and P9 are powerline capable. Which means, they may use powerline to establish backhaul link. Powerline devices are very sensitive to what happens with electrical wiring at your...

@Mmfo7 Sounds like broken hardware. I would suggest installing WiFi analyzer on smartphone. Then, from the distance of 6 feet take readings of signal strength of "new" M5. Do same for one of "old"...

@LEH Dilog DIP-701 has one Ethernet port. Power off DIP-701. Plug Ethernet cable to that port, other end of that cable goes to any of two Ethernet ports of wireless M9 Plus. Power on DIP-701. That...

@MichelR Main Deco must be connected by Ethernet cable, there is no way around it. The recommended solution, if you plan to keep E4, is to buy single Deco unit which has gigabit Ethernet ports, such...

@DeeBee86 You can move Main Deco away from the router, as long as Main Deco stays connected with Ethernet cable to router. Sorry, that's the requirement for Main Deco. The proper way to provide...

@OHO I do recall I saw forum topic where it were discussed that Deco might change its IP settings when it is configured in 192.168.[0-5].* IP ranges. I can't find original forum topic where it were...