Dear @gjunk , The Modem need to be bridge mode (so the tplink router can obtaion a public IP), or at least use a different subnet from the router. You mentioned you have modems set to hand out...

Dear @the-moka-pot , EAP-110 Outdoor support passive PoE up to 60 meters. However it is refer to the Ethernet cable between EAP and poe injector. The poe injector must use a short Ethernet cable to...

Dear @Pud , The router is managed by controller? If so, please try readopt the router on the controller, then test SNMP walk again. If the router is not managed by controller, please backup the...

Zracer15 wrote Hello, I couldn't find the right location to post this question, so I hope this is ok. I have a new TP-Link ER605 VPN Router that I will be using multiple AC1350 wireless access points...

@Theo74 Dear customer, May I have more details about your issue? 1. Do you still remember which firmware you were using before? And which firmware version you were upgrading to? 2. Please try FW...

@mamarcos mamarcos wrote Thank you for your reply! @Hank21 Yes, it has a public IP from the ISP's DHCP There is no VPN I've upgraded to 1.2.0 Build 20220114 Rel.76871 and the problem persists. This...