Hi @self We did not hear the same issue before, it seems like a problem caused by WAN IP changing. Could you please try unplug the tplink router WAN 2(the 4G one) and test it again?

Hi, On the firewall you also need a static route 192.168.5.0/24 to 192.168.0.2 Your router needs to support multi-nets NAT, so it can do NAT for 192.168.5.0/24 network

Hi @RAINDANCER Not sure if I understand you correctly. Port Forwarding has nothing to do with bandwidth control, so I will just ignore the bandwidth thing you mentioned. If you want to do port...

Hi @Mellx1 Yes it can work if there is no Mesh EAP. EAP110 only supports 2.4Ghz so it doesn't supports Mesh

Hi @tomn68 Fallback IP can be considered as EAP default IP address. But the EAP will obtain IP from the router once it is connected to the router. This fallback IP has nothing to do with your...

Hi @Patrick8277 You can go to Online Detection option and change the detection mode to manual, change it to Ping 8.8.8.8 For default mode, tplink router will try ping the gateway but if your Modem is...