I have two identical ER605V1 routers. Both with the identical beta firmware load, both running off Docker based Linux Controllers which are both 5.9.31. Both have dynamic DNS setups at...

@tuckerm If all the other VLAN1 ports are behaving as expected, then I think it's behaving exactly as it should! What you do next is configure one or more VLAN10 access port(s) on your switch, say...

@FrankV So you have applied the same Wireless Profile entry to both APs via the controller? If you temporarily unplug the working AP, does your device join the misbehaving unit, or is it still...

@tuckerm I assume you've configured both LAN subnets on the ER605 and assigned then to VLAN1 and VLAN10 respectively? I also assume the ER605 is the DHCP server for those subnets and not the switch?...

@Daire88 IMHO the best way to fix low speed is to maximize power to the channel, which means the narrowest channel width possible (ie 20Mhz) and max power. I would set up 3 of your 110 devices, one...

@AMCross Correct, you need DHCP and NAT functionality, and if the ISP isn't supplying the router function in their box, then you'll need to add that back. ER605v2, or better ER7206, if you have the...