Find out how to put your modem into bridge mode or, at the very least, reserve an ip for the 7212 and configure the modem's DMZ ip to be the fixed ip of the 7212 wan port. You have a NAT traversal...

@SolarRigTech How are the 3 x 60Gs connected? I assume the APs, 60Gs and server all attach to the same switch? If not what do your wired segment(s) look like?

@SolarRigTech Yes. You just need to properly configure the 3 devices to make it happen, actually you just need to properly configure 2 devices :) As long as the source and destination are properly...

@lithium3141 If your Controller s/w and Router f/w support 1:1 NAT, then you'll find this menu option here: If not and you are running Controller 5.9.x or better, then you will need to wait for the...

@INTERNET_RYAN In the meantime, if you can use port2 or WAN2 for your tagged PPPoE connection...maybe you can LAG several 1G ports to create a multi-gigabit LAN link? Not sure what you have...

@INTERNET_RYAN Ok, if tags are cool on port2, then it is a bug. We'll see if @Hank21 or @Fae can get a ticket opened. My dealings with support on matters like this have been very positive and twice...