@sagar002100 You may have some additional options. Quickest is to make the ER605's IP the DMZ IP on the GPON modem, that effectively makes all public IP ports arriving at the GPON modem available as...

@X3KliixX Have you tried playing with the IPTV setting? In theory that shoudl allow up to 3 VLANs to transit a single WAN port as tagged traffic. I currently have 1 VLAN configured for one site with...

@evinrude Sorry for delay, here's what my 615-wall v1 1.1.6 is showing - it's not doing much right now, mostly IOT stuff

@Joepke Added DDNS support tonight. Found a great little container with a sub-10MB RAM footprint. Handles just about every known dynamic DNS provider out there.

@madvinegar It's less obvious I think in Standalone, but if you configure your WAN ports with static BW capabilities: then under load balacing,tick the Enable BW Based as shown below

Correct, load balancing makes those connections in 'Active-Active', and the weighting allows you make the ratio something other than 50/50 if the connection capabilities are lopsided. You could also...