@UKJim HI Jim, thought I'd chime in a bit here too. I have had experience with similar 'crowds in the country' at ski race events and wanted to share a few thoughts. First, you're lucky to have gig...

@brambil Does the camera get the same ip or range of ips before, or does it get nothing with switch flipped? If the latter, then you need to define matching VLANs in Omada to what the switch is...

@deraxel WRT to the second part of your question, I personally believe there is an issue impacting Android devices in the latest firmware tree, but this has not yet been confirmed by TPlink. So to...

@deraxel Under device management in the controller you can do a manual upgrade with older firmware which you download from the Support pages.

@PerryMarchant Yes, with the latest firmware and a controller (OC200 or software) you can achieve this with the EAP615-wall (my second favourite EAP). As a side benefit, you don't even need to cable...

@ndb217 Are you using solid copper cables or CCA? Are the cable ends newly terminated or have they been 'around for a while'? If you power the AP with a short patch cord directly from the switch,...