RaRuLV3Online
Following: 5Followers: 0
Forums/ Routers
Sunday
Re:Omada controller hardware - Client is connected to LAN even if they are connected to EAP225/EAP110
@infosecX Hi, Are your devices manages by controller? Or standalone? If controller, do you have LLDP enabled? Cheers
2HELPFULS
Forums/ Routers
Friday
Re:ER605 V2
@Mellx1 Hi, Have you checked official instruction for that? I believe point 3.2 is what you are looking for: https://www.tp-link.com/us/support/faq/3654/ Cheers.
1HELPFULS
Forums/ Routers
Friday
Re:WAN and WAN/LAN1 as primary on er605 on omada controller
@Bugs123 Hi, You can as far as I know. I won't help with that since I have no experience with this. Sorry. Keep in mind that this solution has one disadvantage, once the ISP is down, the policy will...
1HELPFULS
Forums/ Routers
Friday
Re:WAN and WAN/LAN1 as primary on er605 on omada controller
@Bugs123 Hi, You can use load balancing and link backup at the same time. Here's more info about that: https://www.tp-link.com/pl/support/faq/4058/ Just keep in mind that Load Balancing is based on...
1HELPFULS
Forums/ Routers
Thursday
Re:ER605 OpenVPN Client setup requires static server ip?
@TuomasG For OpenVPN those may be hardware limitations. For ER605 the OVPN speed is: According to official datasheet from TP-Link. L2TP would be faster for sure. You should try to configure that...
1HELPFULS
Forums/ Routers
Thursday
Re:ER605 OpenVPN Client setup requires static server ip?
@TuomasG IPsec policy that's the right place. Check the official instruction from TP-Link, point 4 and 5 is what you are looking for: https://www.tp-link.com/us/support/faq/3051/ I don't think...
1HELPFULS
123...