johnsnowLV2Offline
Following: 0Followers: 1
Forums/ WiFi
2018-05-18 23:30:13
EAP 225 V2 Firmware 1.4.0
Model : Hardware Version : Firmware Version : ISP : Anyone running 1.4.0, my setup is pretty stable now with 1.3.0 and just want some feedback before i upgrade.
0HELPFULS
Forums/ Kasa Smart Plugs
2018-05-13 01:37:37
Re:HS100, HS110, HS200 firmware level? KRACK risk?
Did you ever find out if 1.2.5 fixes KRACK?
0HELPFULS
Forums/ WiFi
2018-03-26 22:48:52
EAP225 PoE and EdgeRouter X
Model : Hardware Version : Firmware Version : ISP : Wondering why only the Eap225 V3 can be powered by the ER-X?I have a V2 Eap225 will it die if i plug it in the 24v passive PoE port on the ER-X?...
0HELPFULS
Forums/ WiFi
2018-01-10 09:37:15
Re:EAP330 Controller Software
tplink_smb wrote Hi R1D2, Thank you for pointing that out. You are right about there is no way to configure band steering in stand-alone mode through the web UI. I will clarify it here: For some...
0HELPFULS
Forums/ WiFi
2018-01-10 09:21:25
Re:APs, VLANs and Google Cast
Since i have a single AP on port 4 with nothing else i should leave vlan1 as untagged and then tag vlan3 for port 4? I can run a detected wire for port 7 so the EAP is going directly to the managed...
0HELPFULS
Forums/ Switches
2018-01-10 09:00:08
Re:TL-SG-108E V2 - VLAN 1 tagging
fabrizziosoares wrote Thanks. I tried V3 on my V2 and worked. I could see now I can modify VLAN 1. Great! But ..... I still can reach web admin tool from any VLAN or via easy configuration tool. Is...
0HELPFULS