I can't believe it. Two NAT MASQERADE rules did the trick: 0 0 MASQUERADE tcp -- * * 192.168.178.0/24 192.168.10.14 tcp dpt:443 0 0 MASQUERADE tcp -- * * 192.168.178.0/24 192.168.10.14 tcp dpt:80

@GRL I also enabled temporarily access via port 80 to exclude certificate problems, but it also don't work. You are absolutely sure that I should reach with my setup the admin page on both (in...

@GRL Yes, I did. I just double checked and can confirm: Interface ID: 10 IP Address mode: Static IP Address: .10.14 Admin Status: Enabled Interface STatus Up Line Protocol Status Up

I applied exactly this route, but still the same, no access from 192.168.10.14 to the management if. The AI says: "Only the primary Management IP supports web access. Additional VLAN interfaces can...

Here are the ip tables: 22 ACCEPT tcp -- 192.168.178.0/24 192.168.10.14 tcp dpt:443 /* TEMPORARY Switch HTTPS WebUI (FB-Netz) */ 23 ACCEPT tcp -- 192.168.178.0/24 192.168.10.14 tcp dpt:80 /*...

Hi, I want to separate my network into different VLANs and now I am humbling over how I get the switch in my Management VLAN without loosing access temporarily. My setup: My router is a FritzBox 5690...