Forums/
Powerline Adapters
2020-02-02 09:54:22
@TheOrangePea What is the led status of the TL-PA4010 units? You can reset them by holding the pair button for 15 seconds and re-pair them via the tpPLC utility. Below is the instruction:...
0HELPFULS
Forums/
Powerline Adapters
2020-02-02 09:49:08
@Jokr Hello, how do you verify the low traffic issue of two adapters the V2 adapter? What is the actual speed you can get from the two adapters respectively? Have you ever tried to swap the location...
0HELPFULS
Forums/
Range Extenders
2020-02-02 09:42:06
Hello, after you changed a new router, you need reconfigure the TL-WA850RE to make it work. First, you need hard reset it by holding the reset hole for 1s with the extender powered on. Then you can...
0HELPFULS
Forums/
Powerline Adapters
2020-02-02 09:39:55
@gard09 Hello, for your information, all the TP-Link powerline adapters are compatible with each other. Considering you have the TL-WPA9610KIT, the 7/8/9 series would be a good choice. And if you...
0HELPFULS
Forums/
Range Extenders
2020-02-02 09:34:58
@Stebbo Hello, may I know how far away between the main router and the extender? With computer connected to the extender, please run the speed test and show us the results; meanwhile, please click...
0HELPFULS
Forums/
Powerline Adapters
2020-02-02 09:31:04
Hello, for your information, all the TP-Link powerline adapters are compatible with each other; You can add other adapters into the existing powerline network. You can read this article for more...
0HELPFULS

