Forums/
Deco
2024-09-04 15:16:11
@krn07 Have you tried temporary moving the Deco 4 and connecting it via LAN cable to the 1st floor switch, if it works then it would indicate that either an issue with the LAN cable or the 2nd floor...
0HELPFULS
Forums/
Deco
2024-08-29 21:20:49
@Kev205 ok cool, was going to say make sure the IPV6 is working with the smart hub, if not then like you say there is an issue at BT's side. I get 10/10 for my IPV6 test. Cheers
0HELPFULS
Forums/
Deco
2024-08-29 21:06:55
@Kev205 Im with BT FTTP 500mb connection and connect directly to my ONT with my Deco M9 plus, these are my IPV6 settings and it works fine.
0HELPFULS
Forums/
Deco
2024-08-29 19:45:23
@David-TP Following this post my Deco X60 has been working well, however there are times when the X60 loses connectivity to the network and reconnects, this is fine as i know the reason for the loss...
0HELPFULS
Forums/
Deco
2024-08-17 05:36:59
@Madascanbe What does your network setup look like?
0HELPFULS
Forums/
Deco
2024-08-14 19:31:13
@INFO404AK I tried the same a few months ago with my C80 and 2x Deco M9 plus units with a switch. I also got a network loop so gave up and changed my setup removing the C80. It could be your switch...
1HELPFULS