@daaveh The extender won't change the SSIDs automatically after switching off the Mesh feature, but you should now be able to manually edit the SSIDs of the "Extended Networks" to whatever you like.

@Newton_Sharma Hi, If the USB ID of your TX20U Plus is either 2357:013f or 2357:0141, then try this driver https://github.com/lwfinger/rtl8852au .

@daaveh Hi, If your TP-Link router is a somewhat recent model that supports OneMesh/EasyMesh, but you want your RE550 to have SSIDs that are separate from the SSIDs of your TP-Link router, then make...

paoz wrote But if I connect it to other ports that isn't IP-Phone (e.g. Internet, IPTV), I can get it but nothing is happening when I try to set it up. @paoz Verify again that you have setup...

@AndyRozman The versions of the devices don't matter. Any Powerline devices that follow the "HomePlug AV2" standard should work together without issues, even if they were made by different...

@Morholt Hi, Please check that the USB cable that came with the TX20E is wired properly. The little connector that plugs into the TX20E should be wired [ red | white | green | black ] and the F_USB...