Koen-P wrote Hi, I already had a AX73 (V1) (next to an RE700X but ok) Now I wanted to upgrade my network by adding another AX73 through ethernet backhaul Easymesh On my initial AX73 I have the...

@healthboost213 Hi, Can you please run the command ping [my NO-IP DDNS address] and then report back the two leftmost numbers of the IP address reported by the ping command? (for example 125.34.x.x)

@MrDoctor Hi, Two things you could try. 1) Check if your router's Wi-Fi is broadcasting on channel 12 or 13. In case it is, then change the channel on the router to anyone from 1 to 11. Some...

@PaulB1 Hi, In the EasyMesh menu of the web admin screen of the RE900XD make sure that EasyMesh is switched ON. Also, from the extender's web admin screen please click on "Quick Setup". The RE900XD...

@KillerTyzon If the router is not booting, even with no Ethernet cables connected, then a reset will not work. Is "Archer AX3000 V1" the precise model number of your router or is it perhaps an...

@Lespadon That sounds like the problems people have had with EasyMesh routers that didn't support EasyMesh Ethernet backhaul. So the AX55 V1 is running firmware verison 1.3.2 and the C80 has firmware...