Forums/
Adapters
2023-11-22 20:04:51
Re:please help lol had new 1000mb fibre installed got a Archer TXE75E AXE5400 Wi-Fi 6E uploads zero!
@mark25810 Do I understand this correctly that you have another wifi 6e card that gives the same (bad upload) results? If yes, does that card also use an Intel AX210 M.2 module? What upload speed...
0HELPFULS
Forums/
Adapters
2023-11-22 19:38:13
Re:please help lol had new 1000mb fibre installed got a Archer TXE75E AXE5400 Wi-Fi 6E uploads zero!
@mark25810 Hi, Have you already tried another speedtest website to re-confirm this upload behavior? (just google for "internet speed test" if you don't already have another website on hand) Since you...
0HELPFULS
Forums/
Powerline Adapters
2023-11-22 19:27:12
@Jdog7 Hi, Was this fuse box installed for a single-phase charger to be fitted or a three-phase charger? (if the EV charger is 11 kW or even 22 kW, then it must be three-phase for sure) In case the...
1HELPFULS
Forums/
Powerline Adapters
2023-11-22 13:54:59
@crabby2004 Yes, if you are going to get fiber Internet, then either have it installed right where you need the full speed or install an Ethernet cable from the fiber terminal to your place. I doubt...
0HELPFULS
Forums/
Adapters
2023-11-22 13:18:55
@particle Hi, There could be a few reasons, but given the numbers 250-300 Mbit your T4U might be running in USB 2.0 mode, thus limiting it to that speed. So I suggest you verify whether the T4U is...
0HELPFULS
Forums/
Powerline Adapters
2023-11-22 12:49:16
@crabby2004 Hi, Is the 380 Mbps you are reporting the number you see next to the arrow shown in the tpPLC Utility or is that the actual data throughput you've measured?
0HELPFULS
