@BorisTheAnimal Hi, Yes, this is approximately the maximum real-world speed you can achieve with any wireless router that is rated at 866 Mbps, not just the Archer C64. As a general rule of thumb,...

@gvg006 Good. Thanks for reporting back. In case you still want to put the TL-SG116E switch to use, then you could do the following and see whether it improves anything. - Perform a "System Reset" on...

@Idhaya Apparently, firmware for specialized ISP router models is only available via the ISP, not from TP-Link. I don't know what's going on with the LAN ports, but maybe your ISP intentionally...

@leeo Ok, open the *.ovpn file that you exported from the Archer AX53 in a text editor. Within the upper part of that file you should find a line that either contains your Internet IP address (like...

@alejandromr Hi, Try the following. 1) Connect the SenseCAP M1 to your router (not the RE550). The router should now recognize the SenseCAP M1. 2) Get the IP address of the SenseCAP M1 from the...

@leeo In recent years one big stumbling block for people trying to setup a VPN server at their home has been that ISP's often do not assign public IPv4 addresses to home broadband connections...