@sercasti Hi, Do you have access to the configuration GUI of the ISP's modem? (I assume this is a combined modem-router device, is it?) If yes, then another option would be to run the AX21 in router...

@KillyKlamm Hi, What is the hardware verison of your Archer C7? Does your router's user interface look similar to the screenshot below? If it does, but you can't see the "Enable WDS Bridging" options...

@JB211 Hi, How are the routers bridged together exactly? Is it via an Ethernet cable that connects from a LAN port of the Archer C6U to a LAN port of the mweb router? Does the NAS show up in the...

@MrOtto Hi, Check if you can find a setting in the Advanced properties of the AC3100 card's driver (via Windows Device Manager) that allows to set a preferential band (for example something named...

@thilonel Hi, When you used your router's Internet IP address to connect a client via OpenVPN, to what network was the client device connected to at that time? Anyway, if the IP address shown by...

@CandyBass Hi, If you are using passive ftp mode, have you also limited the ports vsftpd uses by adding the parameters "pasv_min_port=60001" and "pasv_max_port=60010" ?