@Ehsan0921 Could you post a screenshot of the configuration page here? (if there are usernames and passwords visible in the screenshot, then use a paint software to remove them)

@wgil It's hard to tell which device could be the source of the problem. As far as the router is concerned: In case your TL-WR841N is broadcasting on channels 12 or 13, try to set it to any channel...

@Mala116 If you want both routers to be in the same subnet and don't need any of the special router functions of your C6, then you could switch the C6 to "Access Point" mode and check if that works...

@Mala116 Do you mean you can't change the LAN IP address to a very specific one or you can't change it to any other IP address at all? Anyway, the WAN IP address and the LAN IP address cannot be in...

@Jaycero There could be more than one way to setup Windows firewall, but here is how I did it. (I don't have the English user interface installed for Windows, so the my wording might a bit off) From...

@Josweet If the information I've found on the internet is correct, then the Archer AX50 / Archer AX3000 is equipped with 128 MB of flash memory and 256 MB of RAM, while the TL-XDR3020 merely has 16...